Running module parameters


module 8 : Digitizing Plus
•	General Digitizing Plus Tools
•	Satin Parameters
•	Satin Serial Parameters
•	Fill(Step) Parameters
•	Zig-Zag Parameters
•	Piping Parameters
•	Running Parameters
•	Photo-stitch Parameters


Running module™ parameters:


	Running parameters for existing punching objects:

	With Running stitch type you can add a series of running stitches. In this case, a smooth curve connects the nodes that you are adding.
	The parameters that you can change in this type of punching are:
	Repeats of the outline. Offset of the stitches according to the outline. Random length of stitches

	Repeats:
	In this parameter you can specify the repeats of the punching object that you are adding.

	Offset:
	With this parameter you can specify the distance between punched curve and the position of the stitches in millimetres.

	Random:
	With this parameter you can specify the percentage of stitch randomness in a selected or new punching object. For example if you specify 20% random and the stitch length is 4 mm, all the stitches in this object will be between 3.2 and 4mm. Even if you are using the random parameter, the maximum stitch will not be longer than the stitch length that you have specified.

�